3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [repetier-host]

For questions regarding the repetier-host software used to send g-code commands to 3D printers

Repetier-Host is a 3D printing application developed by Hot-World GmbH & Co. KG. It is a host software, meaning it is used to send g-code commands from a computer to a 3D printer. More details here.

18 questions
7
votes
3 answers

What causes gaps in small region fills and how to prevent them?

I saw this cool Nuka-Cola bottle opener. I made it: As you can see, nasty gaps have appeared in the text. What could've caused them? I am sure I set the filament diameter correctly. So why did the Slic3er not generate enough paths here to fill the…
Tomáš Zato
  • 512
  • 6
  • 22
7
votes
3 answers

Repetier Host stops sending commands to printer when switching Windows user

I'm running Repetier Host v1.6.1 with Repetier Firmware v0.92.9. My computer is running Windows 7 Pro SP1, 64-bit. If I set a print going via USB then switch to another user (note: I do not log out), then the pinter's display shows that the command…
Excrubulent
  • 183
  • 8
6
votes
1 answer

Distortion calibration on XY plane in Repetier

I built a delta 3d printer (like a mini Kossel) and now I'm trying to calibrate it. I made all the horizontal and vertical bars myself with wood and I bought angle joints (between bars) made with 3D printed ABS. It passes all tests in Z correction…
xxx
  • 103
  • 1
  • 7
5
votes
1 answer

Extra data appended to the Y values when issuing `M92` & `M500`

I am still trying to dial in my Anet A8. The Marlin firmware takes too long to scroll through the axis settings when I change them, so I use Repetier Host instead issuing M92 followed by M500. I noticed in the log window that X goes in as typed but…
Plodmore
  • 357
  • 5
  • 13
5
votes
3 answers

How should I go about printing easily removable rafts?

I have had a 3d printer for a while now, and I have a lot of the quality settings dialed in pretty well, but one thing that constantly bugs me is removing the raft from my finished prints. I am using Repetier and I have set the air gap to 0.2 mm.…
Matthew
  • 153
  • 1
  • 4
4
votes
2 answers

Anet A8 Calibrated but print sizes are wrong

Anet A8 printer, Github Marlin, Repetier Host, Cura slicer Just setting up printer and printed 20mm calibration cube from Thingiverse. X,Y,Z & E not too far off but not quite right (centre hole was oval not round) X19.5mm, Y19.5mm & Z20mm. Followed…
Plodmore
  • 357
  • 5
  • 13
4
votes
2 answers

Is Repetier host able to do multi-material printing?

Can Repetier host run a multi-material printer such as the Prusa i3 MK2S?
TECTEC3 Studios
  • 416
  • 2
  • 6
4
votes
2 answers

Bed leveling method not working with Repetier firmware 0.92.9?

I homebuilt a delta 3D printer (like Kossel mini) with a Z probe near the hotend with manual deploy and RAMPS 1.4 board: I configured the Repetier firmware with the online tool; All my endstops (included the Z probe endstop) work in reverse mode,…
xxx
  • 103
  • 1
  • 7
3
votes
1 answer

Prusa XI3 not printing correctly with Repetier Host

I have a HE3D Prusa XI3 Specs are linked here. Its came with a MK8 Extruder, and I ordered the 0.3mm nozzle with it. I have Repetier v.91 loaded onto the printer right now, and Repetier-Host v1.5.4 on my computer. I have been able to print the test…
Dakota Miller
  • 605
  • 6
  • 13
3
votes
1 answer

Offset in X or Y axis

How can I set an offset in y or x axis so that I can move the position of my printed object. I have tried doing this with so many options in Repetier, and in Slic3r, and still nothing, please, have you got any ideas? First Edit: I have added an…
Dauph
  • 303
  • 3
  • 11
2
votes
1 answer

How do I decrypt messages on my Repetier firmware?

I need to send a complex password to my machine. The machine needs to decrypt it and run it. I have not found enough resources for such an operation. More detailed description: I am developing a new feature for my 3D printer which runs on Repetier.…
NeverGiveUp
  • 21
  • 2
2
votes
1 answer

Low Accuracy while perfect travel movement

I own an older Anet A6. Flashed the Marlin Firmware on it (and think I configured it properly). Also updated to the latest 2.0.5.3 some days ago). The nozzle is a 0.4 mm one, direct drive extruder. When printing calibration cubes I used #define…
GWRon
  • 21
  • 2
2
votes
1 answer

Marlin 2.0.x bugfix 2nd extruder not working

I am using the SKR PRO board on a dual extruder 3D printer. I have tried Curaengine and Slic3r in Repetier-host. The printer firmware is handling the offset fine (it prints in the right spot for extruder 2 when it switches extruders) but it won't…
DaGentooBoy
  • 41
  • 2
1
vote
1 answer

How do Repetier coordinates setup work

I am using Repetier Host and Slic3r Prusa 1.36.2 - (the website says 1.2.9 is the latest version - however I don't believe this is the problem) . The printer is a Anet A3 With my current setup I am printing mirrored - I can mirror the objects in…
Ross
  • 205
  • 2
  • 10
1
vote
1 answer

Prusa I3x and repetier host heat problems

I've saved settings in the slicer for pla and abs, set the default bed temp to 90 and extruder to 185. No matter what settings I select to print with, the bed temp sets to 110 and the extruder to 230 when I send a job to print which I don't want. If…
James
  • 21
  • 1
1
2