3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [software]

Questions about either slicing engines or 3D modeling software.

For questions regarding either the slicing engines that provides 3D printers with the commands to print or the 3D modeling software used to create the model that is imported into the slicing engine.

128 questions
19
votes
9 answers

What is the best 3D modeling software for a beginner on a 3D printed mini barrel project?

My goal is to 3D print a 5 liter miniature barrel with a side stand, similar to this wooden one on Amazon. I want it to have a removable top so that a boxed wine bladder may be put inside, and there should be a hole on the top as well so that the…
Maxim Berezin
  • 193
  • 5
18
votes
5 answers

Tool to measure in STL files

I want to create parts for a 3D printer using OpenSCAD. Having some STL files from the vendor, but nothing else (no technical drawing, no CAD files). Does anybody knows a free tool, that allows me to measure distances between 2 selected…
Thomas S.
  • 903
  • 4
  • 9
  • 21
14
votes
8 answers

Good (preferably free) Beginner Software for Part Creation?

What software is best for the basest of n00bs when it comes to 3D parts creation? I have a heavy math background and know how to create explicit functions of volume, surface area, center of mass, etc. Ideally, I'd like a program that uses those…
Cerberus
  • 143
  • 3
14
votes
1 answer

How to build CuraEngine?

I've been trying to build CuraEngine on Ubuntu following the Github instructions. The problem is that it lists some requirements: Clone the CuraEngine repository; Install Protobuf (see below); Install libArcus. I'm not sure where should I install…
Jorge Cuevas
  • 323
  • 2
  • 7
12
votes
2 answers

How to configure Cura to run the Z probe before heating

I'm using Cura as my slicing/printing software and I just started using the BuildTak printing surface. The BuildTak is damaged by pushing a hot nozzle into it and my printer's (Robo3D R1+) autoleveling feature works by pushing the nozzle into the…
Nir
  • 2,401
  • 4
  • 18
  • 32
12
votes
2 answers

Printing Plastic Replacement Parts

On a number of occasions I've broken small plastic parts that are nearly impossible to replace but could easily be 3-D printed. The latest such mishap is the volume knob on the factory-installed radio on my car. I have little experience in 3D…
James
  • 249
  • 2
  • 7
12
votes
2 answers

3D printing with blender

I have an object that I want to print in 3D. But I have a few questions about it. What are the things that I have to watch out for when 3D printing? I know how to change the metric size etc. Some people said that it's best to set the thickness to…
Ulus
12
votes
2 answers

What is a printer console/terminal?

I read that G-code commands can be sent through a console/terminal over USB. What is a console/terminal and how do you use that?
0scar
  • 32,029
  • 10
  • 59
  • 135
11
votes
5 answers

What are some good FOSS or free tools for editing STL files for 3D Printing?

I'd like to customize and modify some parts on Thingiverse, beyond just simple scaling for 3D printing. I've been looking for some tools that convert the STL files into something that is easily edited, but so far all that I've found are really buggy…
Jim
  • 213
  • 2
  • 4
9
votes
5 answers

Software for adding supports to 3D printed miniatures in STL file

My main application for my 3D printer (Zortrax M200 Plus) is making 28 mm scale miniatures for role-playing games. Basically people and animals at 1:60 scale, which means that things like arms, legs, or weapons are only a few millimeters thick. If I…
Tobold
  • 193
  • 1
  • 1
  • 5
9
votes
6 answers

Linux software for laser engraver

I am searching for a Linux software to control the 3000 mW laser engraver depicted below. It's a common model you'd find on AliExpress, Banggood, etc. under different brand names. I have already tried nejePrint, LaserWeb, and EzGraver, but they…
typo
  • 926
  • 1
  • 8
  • 13
8
votes
2 answers

Settings for vase mode in Cura?

I keep hearing about vase mode, but I have some problem figuring out how to set it up in my slicer; I use Cura slicer. So, I'd like to get some settings to do it in Ultimaker Cura, using PLA if the material is important, plus any advice on how to…
Sava
  • 504
  • 2
  • 5
  • 19
8
votes
1 answer

How to print a two color part with only one extruder

I'm planning my first project. I want to print an iPhone case with a flush letter on the back, but I want the letter in a different color (single extruder printer). The thing is the two colors will be on the same level. Do I create two separate…
Joe Blow
  • 183
  • 1
  • 3
8
votes
4 answers

Sharing a printer over a network

I have a Tronxy X3 (i3 Clone) running Repetier firmware on a Melzi board. I would like to share the printer over my home network so that: Both my boys and I can use the printer. (We have separate Windows 10 PCs) I can initiate a print from my…
markshancock
  • 2,412
  • 2
  • 11
  • 35
8
votes
7 answers

What is the easiest way to modify/resize an object inside a STL file?

I have this GoPro mount for a quadcopter as STL file. It looks as follows. How do I modify it so that it is wider and longer by a few millimeters but the screw holes stay the exact same size? Additionally the angle of the upper surface must stay…
Tony Stark
  • 183
  • 1
  • 1
  • 3
1
2 3
…
8 9