3D Printing Stack Exchange
3D Printing Stack Exchange

Most Popular

more tags
1500 questions
10
votes
3 answers

Recalibrating Home-position

I got myself the Ender 3. The Home position is about 1 mm left and 2 mm in front of the front left corner. Now, the hotend center axis is 11 mm from the carrier plate with the "Mk 10" cooler mounted right onto a pair of 5 mm pegs that are part of…
Trish
  • 20,169
  • 10
  • 43
  • 92
10
votes
3 answers

Printing with colorfabb XT fails after several successful layers

I'm printing parts for a HEVO (HyperCube Evolution CoreXY), using Colorfabb XT filament. After several successful prints. I'm having a lot of failed prints. They start off pretty well but after ~15 layers the filament starts to string and blob.…
Toon
  • 149
  • 7
10
votes
5 answers

Writing G-code : swiping at start of print

Ok, I did it, I ordered myself an Ender-3, a genuine 24V e3D hotend, inductive sensor and some better tubing/clamps to cope with the problem the CR10/Ender line has occasionally. But now I need to fix up my Cura for the machine coming in. The start…
Trish
  • 20,169
  • 10
  • 43
  • 92
10
votes
4 answers

How do skirts aid print bed adhesion?

In cura one of the options under "build plate adhesion" is "skirt", which seems to simply print a loop around, but not touching, my print. How is this supposed to help my prints stick to the bed?
linuxdan
  • 1,289
  • 11
  • 27
10
votes
6 answers

Are the Makerbot 5th generation's initial issues resolved

I am considering buying a 3D printer for work (scientific research). On paper, the Makerbot 5th generation seems to be the best option, because the price is right for my budget, and also because I'm generally pretty busy, so I want something that's…
N. Virgo
  • 1,489
  • 1
  • 14
  • 25
10
votes
2 answers

E axis vs Z axis

When using G1 command in G-code, what is the difference between Z- axis and E- axis? I see all E, F and Z in G1 Z0.350 F7800.000 G1 E-2.00000 F2400.00000 G92 E0 G1 X96.753 Y95.367 F7800.000 G1 E2.00000 F2400.00000
ar2015
  • 203
  • 2
  • 7
10
votes
2 answers

What is causing 'droplets' on first layer?

I recently changed filament and for starters it worked perfectly well, but quickly I got some problems with my first layer. It's like droplets are forming on the surface (finished item + 3 undersides): The final part is (for me) okay but I'd like…
Valmond
  • 864
  • 1
  • 8
  • 15
10
votes
4 answers

Under extrusion towards the end of the print

I have really strange problem. Thing is that my print (first layer) started ok, not good nor perfect but ok and everything was going well but then all of a sudden, near the end of a print, quality drops drastically. I'm not really sure but I think…
Rakic
  • 103
  • 1
  • 7
10
votes
3 answers

3D printer stepper motors only going one direction and skipping in the other

I have built a couple of 3d printers now and I'm having a little trouble with one I'm currently on. I frankensteined this one with two of my other printers that I had built. I took the Arduino mega and ramps 1.4 out of the older one and wired it up…
Dakota Miller
  • 605
  • 6
  • 13
10
votes
1 answer

What parameters affect cylinder regularity?

I'm printing cylindrical pins for a spool holder, but all my pins have irregularities on the external surface of the cylinders (see photo for partially printed pin with irregularities). It's hard to tell for sure, but it appears that the hot end…
Doug Richardson
  • 203
  • 1
  • 6
10
votes
4 answers

Is it necessary to have both hot ends on a dual extruder printer at the same height?

I'm thinking of another extruder on my printer, and I'm curious about this one.... Is it necessary to have both hot ends on same height? Why yes / why not? (if there is not)
Josip Ivic
  • 701
  • 1
  • 5
  • 26
10
votes
1 answer

Is there a way to invert motor direction with G-code instead of Firmware in Marlin

Is there a way to change the direction a motor goes with G-code instead of reconfiguring Marlin firmware?
jbiondo
  • 101
  • 1
  • 1
  • 4
10
votes
4 answers

SLA prints not sticking to build plate

I have been working with our SLA printer (Facture Draken) for a couple weeks now printing in makerjuice waxcast. . I have had some successful prints, but the majority (80%) end up as pancakes stuck to the bottom of the resin tray. Some others…
DMrFrost
  • 362
  • 1
  • 4
  • 16
10
votes
5 answers

How can I add auto bed leveling before print?

I want to add auto bed leveling before each print. When I enable auto bed level in configuration.h, it only shows auto bed in menu. I found this code in cardreader.cpp void CardReader::openAndPrintFile(const char *name) { char cmd[4 +…
Hadi Barak
  • 201
  • 1
  • 2
  • 4
10
votes
4 answers

ABS or PLA for structural printed parts?

TL;DR Is ABS a better material to use for structural parts of a 3D printer, as opposed to PLA? I have been looking at various suppliers of printed parts for a Wilson II, on eBay. One supplier supplies all of the parts printed in ABS, whereas…
Greenonline
  • 5,831
  • 7
  • 30
  • 60
1 2 3
…
99 100