3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [bigtreetech]

For bigtreetech displays, drivers, modules, motherboards.

35 questions
7
votes
1 answer

How to wire P.I.N.D.A. v2 to an SKR V1.3 board?

I bought a BigTreeTech SKR v1.3 main board and a P.I.N.D.A v2 for my P3Steel MGN. Does anyone know to wire them together and which part in Marlin 2 do I need to change?
Jack Iai
  • 71
  • 1
  • 1
  • 2
5
votes
3 answers

Noise cancelling Chiron Y-axis

I want to be able to run my Chiron during night-time, but my neighbours tries to sleep at that time of day. I have put a lot of effort into making the printer silent. The controller-fan and power-supply-fan now run slower and only when needed, I…
dotswe
  • 360
  • 2
  • 10
4
votes
0 answers

Connecting 128x64 OLED to BIGTREETECH SKR mini E3

I'm trying to connect a 128x64 OLED display with the SH1106 driver for the BIGTREETECH SKR mini E3 printer controller board which uses the 32 bit STM32f103RC MCU. Note that it works fine with my RAMPS 1.4 board but when I compile it on PlatformIO…
Oliver
  • 41
  • 2
4
votes
3 answers

Bigtreetech upload stalled after uncommented REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

I recently bought a BigTreeTech SKR V1.3 and uncommented REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and clicked the upload button but faced an error that says: Marlin\src\lcd\ultralcd.cpp:767:9: error: 'touch_buttons' was not declared in this…
William Jerome
  • 61
  • 2
3
votes
4 answers

I can't figure out how to name this problem or solve it

(Ender 3 Pro with Bigtreetech Board and Touchscreen, BlTouch) Hello everybody, I want to print something for my family but the hotend gets clogged every time in the same part of the print. I tried: Different Nozzles Different Filaments I cleaned…
Ericsonpsy
  • 61
  • 5
3
votes
1 answer

What UART port to use for RPi GPIO pins on an SKR v1.3 board

I have a Bigtreetech SKR v1.3, and I'm trying to connect a Raspberry Pi to the board using the RPi's GPIO pins as opposed to using a USB connection because space is limited within the case of CR10S Pro. I watched this youtube video where he explains…
ipatch
  • 131
  • 5
2
votes
1 answer

Possible to get G34 auto align and IDEX with Ender 3 Pro and BTT E3 RRF?

Long story I'll try to bullet point to speed up so bear with me: I have a heavily modded Ender 3 Pro Relevant mods for this question: Control board swapped for BTT E3 RRF, Dual Z motor, BLTouch Ultimately I'd love to convert the Ender 3 pro to have…
Joseph Crozier
  • 360
  • 4
  • 14
2
votes
2 answers

Why would all of the Ender 5 Pro's axis motors (X, Y and Z) stop being able to move (all at once)?

I have a Creality Ender 5 Pro which has been working properly for some time. During my last print, the axis motors just suddenly stopped working while the extruder motor continued to work properly. In fact, when I connect the extruder motor wire to…
Mahlomola Daniel Cwele
  • 51
  • 4
2
votes
1 answer

Z banding issue

I'm currently facing a Z banding issue that frustrates me more and more. My printer is a modified Anycubic I3 Mega. Customizations: Mainboard: Bigtreetech SKR 1.4 Turbo Stepper Drivers: TMC 2208 v3 Hotend: E3D Titan Aero Hotbed: 5 mm aluminum base…
zero695
  • 31
  • 4
2
votes
1 answer

Configure Marlin for tool changing system

I am planning to build a CoreXY machine with a tool changing system. I am using Marlin firmware and BigTreeTech SKR PRO as the controller board. There are 3 options in Marlin for tool changing systems: Switching tool head Magnetic switching tool…
Mahan Lamee
  • 49
  • 10
2
votes
1 answer

OctoPrint won't stop my print with a pause

Using the PrusaSlicer I discovered that we are able to insert a pause in mid print. I wanted to use such feature to insert a lens in my print so I don't have to glue 2 parts to make my magnifying glass. But unfortunately the print didn't stop at the…
Sandra
  • 21
  • 4
2
votes
1 answer

BigTreeTech mini e3 V1.2 endstop installation

I recently purchased a BigTreeTech mini e3 V1.2 controller for my custom built 3D printer (as opposed to an pre-purchased ender 3). In doing so, I ran into the problem that the endstops I have been using have three wires: Power, Ground, and signal.…
Jack Hasselbring
  • 89
  • 1
  • 6
2
votes
1 answer

Will the TMC2130 V3.0 stepper driver work with the Ramps 1.6 Plus board?

I want to buy the board Ramps 1.6 Plus. The description in the link says that is compatible with the driver TMC2130, but I found that there are two versions soldered in SPI mode. BIGTREETECH TMC2130 V3.0. Where the diagnosis pins are soldered as…
ChesuCR
  • 157
  • 2
  • 12
2
votes
0 answers

How do I install the USB drivers for Bigtreetech's SKR Mini E3 v1.2?

I want to install the USB drivers for the BIGTREETECH SKR Mini E3 v1.2 from the GitHub page but I don't know how to proceed. Any help will be greatly appreciated.
Liam
  • 669
  • 4
  • 11
  • 19
1
vote
1 answer

Why does the ZAxis not move when I autohome when using the BTT as a probe and the SKR e3V3 image?

I have a printer with a v3.1 BLTouch and a BTT SKR mini E3 V3 and I can't get the BLTouch to work as a probe while homing. I have tried both of the images provided here and both cause the BLTouch to deploy properly but when I autohome and it gets to…
Jackie
  • 143
  • 1
  • 1
  • 6
1
2 3