3D Printing Stack Exchange
3D Printing Stack Exchange

Most Popular

more tags
1500 questions
5
votes
1 answer

Opening .STL to scale in Print Studio (Dremel)

New to 3D printing so sorry if this is a simple/basic question. I've done a ton of Googling but can't seem to find the answer... When I download a .STL file and open it in Print Studio, it opens as a HUGE object - much larger than you would ever…
Jason
  • 51
  • 1
5
votes
1 answer

Small Z axis step: Repetier-Firmware

Z axis length for my printer equals 120 mm. When I manually pass this length, from display controller menu, it's about few millimeters. Then I set the resolution (ZAXIS_STEPS_PER_MM) at 1600 steps per mm. And nothing changed, step still very…
celebnseventeen
  • 87
  • 2
5
votes
2 answers

How to smooth the surface of parts printed with Co-polyester (PET) filament

Are there any techniques for getting a smooth finish for parts printed with co-polyester (PET) filaments? More specifically, I am looking for an alternative that does not roughen the look of the part - such as using sandpaper - but rather works like…
Tormod Haugene
  • 3,947
  • 2
  • 20
  • 40
5
votes
2 answers

Non-Heated Beds affect on 3D Prints

I'm looking to buy my first 3D Printer, on a tight budget of $250. Unfortunately, this printer that I found on Amazon comes with all the bells and whistles, except for a heated bed. I want to know if this would affect printing severely, as I have…
GipsyD
  • 423
  • 2
  • 12
5
votes
3 answers

3D printers for ceramic clay?

Are there any extruders and printers that do a good job with ceramic clay? I assume the clay has to be fine grained and with enough water added to be able to be pushed out through the extruder's nozzle. I also assume the print speed would have to be…
Kjell Rilbe
  • 151
  • 2
5
votes
2 answers

Resources/methods to construct STL files using disparate parts using OpenSCAD

What resources or methods would OpenSCAD users suggest to piece together disparate STL files? I'd like to take an existing STL model-library of STL parts (head, torso, arms, legs) and make it a Thingiverse OpenSTL maker, similar to the castle…
William M-B
  • 151
  • 4
5
votes
2 answers

M4 screw and nut for 3D printing?

Does anyone know where I can get a free 3D design (STEP or STL) of an M4 Screw and nut? I have found only an M3 on Thingiverse: M3 Bolt by Kaleta.
xybrek
  • 375
  • 1
  • 3
  • 9
5
votes
2 answers

Printing objects with holes using M3D Printer

I am using an M3D printer and loaded an STL design with holes in the middle: However, the output is an object without holes (so I stopped the printing): What can be done to be able to print with holes?
xybrek
  • 375
  • 1
  • 3
  • 9
5
votes
4 answers

3D printing and coating of heat-resistant objects, such as a turbine blisks or blades

Is it possible to 3D print an axial turbine 2 - 4 inches (50 - 100 mm) in radius, capable withstanding temperatures about 800 - 1000°C and rotation speeds of 100 - 120 x 103 rpm? How expensive is that? Is it cheaper to mill such a turbine from a…
Eugene
  • 163
  • 5
5
votes
2 answers

How can I learn to create models for 3D printing?

I've recently bought a 3D printer and waiting for it to be delivered I've given quite a lot of time to looking things up on Thingiverse. I see people create incredible models with gears, screws, lids and a lot of very cool and functional connectors…
BlueCloud
  • 51
  • 3
5
votes
2 answers

While filament loading extruded filament wiggles

I cleaned up my Flashforge Creator Dual tonight, and loaded some transparent ABS prepping for a print. The filament extruded fine, then started to wiggle, then became fine again. Hot end is 0.4 mm and was heated to 230C. What sort of steps should…
EvilTeach
  • 661
  • 5
  • 14
5
votes
3 answers

Does the amount of figures on the board matter?

When 3D-printing on an 20*20cm, I've heard that the quality of the printings get worse if I fill out the board... Is it true? Should I keep it to small amounts at the time or doesn't it matter?
Daniel Cortild
  • 153
  • 4
5
votes
2 answers

Autobed leveling doesn't compensate

I finally manage to setup the ABL on my Prusa. I run G28 to home all axes (for z I use the same probe used for ABL). Then I run G29 E ( I use E because otherwise for some reason I have not understood yet, Z does not lift during probings) probing 4…
FeliceM
  • 581
  • 7
  • 18
5
votes
1 answer

Wanhao duplicator i3 print bed support warped

As you can see in the picture, my heated bed support is too low on the right side, even touching the Y-axis chassis end plate. This is only the case on the front of the printer. The back is perfectly straight. Do you know how this can happen and…
Hacky
  • 445
  • 2
  • 11
5
votes
2 answers

stl files -measuring stl files

I had a problem with my Z limit switch bracket falling just short of the bottom edge of the z stage. I'm trying to make the bracket thicker so it's pushed more towards the left. 1) how do I measure the thickness of the bracket in the stl 2) HOw…
Ageis
  • 637
  • 1
  • 6
  • 14
1 2 3
…
99 100