Questions tagged [chitu]
8 questions
2
votes
1 answer
Are there printer firmware specifics when adding printer profiles to slicer software?
In this question, I was struggling with my printer not recognizing sliced files. Switching from ChituBox to Lychee solved the issue until the printer stopped recognizing the .ctb files sliced by Lychee as well. Something clicked and it occurred to…
Lux Claridge
- 829
- 2
- 10
- 28
2
votes
1 answer
Chitubox estimated time very away from the real time
Some time ago, I bought an Elegoo Mars 2 Pro, and I really liked the product. This is my first resin printer and I am very satisfied.
What has been bothering me a little is in relation to the slicer. When I slice an item, Chitubox shows 3 hour/20 g…
wbrrtt
- 65
- 3
1
vote
1 answer
Chitubox stopped slicing files correctly
I just bought an Elegoo Saturn S and used ChituBox for slicing. I had sliced a couple of models but for some reason the printer stopped recognizing the .ctb files the other day. I sliced a model and started the print, but it failed. Then when I…
Lux Claridge
- 829
- 2
- 10
- 28
1
vote
1 answer
Are bottom layer Curing settings automatically applied to everything touching the build plate?
When using Chitubox as a slicer for a resin print, will the bottom layer curing settings automatically be applied to any party of a model that is in contact with the build plate, or only to certain areas such as support rafts?
For example, if you…
Aaargh Zombies
- 1,286
- 3
- 10
1
vote
1 answer
Bottom layer exposure for prints placed directly on the bed (resin printer)?
I have an Elegoo Saturn Mono resin printer.
If I make a 3D model that has a "sacrificial layer" on the bottom, and I place it flat on the bed, will the area in contact with e bed automatically be exposed as a bottom layer with a longer exposure…
Aaargh Zombies
- 1,286
- 3
- 10
0
votes
1 answer
Can I combine several ".CTB" files together into a single file?
I've used Chitubox to add supports to a number of models and saved them as .CTB files ready for printing.
If I want to print several of these models at the same time, is it possible to combine them into a single file and to assign each one a…
Aaargh Zombies
- 1,286
- 3
- 10
0
votes
0 answers
Chitubox - Why are some supports show as Green but others are Gray?
In Chitubox, why is it that some supports are highligted green, while others are colored gray?
I've checked all of the settings and the green and gray supports seem absolutely identical. The only thing that I can think of is that at least some of…
Aaargh Zombies
- 1,286
- 3
- 10
0
votes
1 answer
Installing multiple versions of ChiTu side by side
I am using two resin printers based on the ChiTu software (Creality LD-002R and SainSmart Kumitsu KL9), and the former uses ChiTu 1.6.2, while the latter came with 1.6.1. I believe both will work just fine with the latest version, but it occurs to…
0xF2
- 255
- 3
- 13