Stringing issue.
I'm using:
- 1 mm nozzle
- 200 °C
- 40 mm/s speed
- 0.75 mm layer height
- retraction is 7.5 mm and;
- 70 mm/s
Material: PLA+.
Note: I would like to keep the layer height the same
How can I solve this issue?
Asked
Active
Viewed 123 times
0
0scar
- 32,029
- 10
- 59
- 135
bruh beast
- 1
- 1
-
7.5 mm is pretty long for such a short Bowden, have you tried shorter lengths? – 0scar May 25 '22 at 22:30