iPhone XS Rear Camera Lens Cover Replacment

Written By: cPix

Comments: 4

iPhone XS Rear Camera Lens Cover Replacment

Difficulty

Easy

Steps

Time Required

15 minutes

Introduction

Step 1

To begin with, it will be necessary to remove the pieces of glass from the old broken camera lens.

Step 2

Once the glass shards from the camera lens are removed, thoroughly clean the camera bezel (the raised metal part around the camera).

only my bottom lens is cracked, how do i get a nice crack on the top lens to break the rest out

None Of Your Business -

Help! I had a small crack. In trying to remove the glass I damaged the lens underneath and caused damage to the actual camera.

The removal of the glass is very difficult. Can anyone provide any information on how to do it well? I have replaced iphone screens and batteries etc and this is by far the most difficult fix I’ve tried on iPhones.

Aris Vrakas -

what was your solution? how would you do it better? heating?

Adab Abu -

Step 3

Adhere some double sided tape or two dots of glue on the new iPhone X rear camera cover.
Use tweezers to position the glass lens in its housing.

Any suggestion about what type of glue to use? …I can’t imagine that double-sided tape is a great option…?

Bradley Kirschner -

Step 4

Lightly press down on the lens for a few seconds to create a good seal.
You can test your rear camera to verify the quality of your photos and videos.

Conclusion

Congratulations ! You have repaired your iPhone XS, the lens is replaced, clean it with a microfiber cloth. You can now take photos and film normally.

Author

cPix

Member since: 14/06/16

3643 Reputation