Introduction
Follow this guide to replace the Fingerprint Scanner for the ZTE Blade Spark. To get to this step please see ZTE Blade Spark Disassembly Guide
Tools
-
-
Remove the Fingerprint Scanner:
-
Gently lift to disconnect the scanner's power connector from the device main frame.
-
-
-
Now that the scanner and device back panel is detached from the back of the device , push the scanner through from the front side of the back cover.
-
Once you have done so, set aside.
-
Conclusion
To reassemble your device, follow the instructions on the ZTE Blade Spark Disassembly guide in reverse order.
