Introduction

Please remember that these controllers are not designed to be repaired so do not be surprised if you need to be rough with it or something was not initially installed correctly. Also, the same kind of screw was used throughout the controller.

  1. 4xLVbqREJFDLLUQZ
    • Remove the six 7 mm Phillips screws from the rear cover.

  2. gMILJJA3HhYEyBoQ
    gMILJJA3HhYEyBoQ
    obc6EpDFgHj3Ra1l
    • Remove the back of the controller.

    • There are no loose items in the controller that can fall out, so you can open it, generally, however you want.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alexander Coyne

Member since: 11/01/15

631 Reputation

0 comments