Introduction

This guide will show you how to replace the phone buttons on your LG Thrill 4G in just a few simple steps. A few tools that you may need are listed below. You should turn off your phone before starting.

  1. sbp4Zqxt4nSrUq5d
    sbp4Zqxt4nSrUq5d
    6OeRLMU3U3wGZO6b
    • Pry open the back cover by using a fingernail or a plastic opening tool.

    • There is a small notch at the bottom of the cover for easy removal.

  2. BAAPfV1dWTQGVccf
    BAAPfV1dWTQGVccf
    I1KoJKVPluW5TTAl
    • Remove the battery from the phone.

    • There is a small ledge located at the bottom of the battery for easy removal.

  3. lNAoiH3qtZtF4ekx
    • Remove the three Philips #00 screws from the bottom of the phone.

    • Two 5.5 mm screws

    • One 4 mm screw

  4. Pb5UkHdPuFnndphP
    Pb5UkHdPuFnndphP
    a3CiteZhQghXagoi
    • Use your finger or opening tool to wedge the speaker out starting at the small notch at the bottom of the phone.

  5. 5IQyiaDUoWIWJ5uk
    • Remove the three buttons from the side and the top of the phone.

    • Power button

    • Volume button

    • 3D camera button

  6. ZSXk4lckG1gS2rDe
    ZSXk4lckG1gS2rDe
    wHSKsUBmbgUIAocO
    yY5ICxYcRXCbvt43
    • Place the plastic opening tool under the bezel at either bottom corner of the HDMI cover.

    • This loosens both the HDMI and USB covers for easy removal.

    • USB Cover

    • HDMI Cover

  7. XWWHDLhdLYnVS4DG
    • Remove the six Phillips #00 screws within the mid-cover bezel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kenny Richmond

Member since: 20/01/15

260 Reputation

0 comments