Dexcom G6 Receiver Display and Front Bezel Replacement

Written By: Andrew S
  • Comments: 3
Dexcom G6 Receiver Display and Front Bezel Replacement

Difficulty

Easy

Steps

2

Time Required

No estimate

Introduction

This guide will show you how to disconnect the display and display frame from the motherboard.

  1. TQH5hba2OEb12Eyu

    • Unscrew the 6 Torx T5 screws from the back of the device

  2. ZVDEtYgaK1YcrEWJ
    ZVDEtYgaK1YcrEWJ
    t5XDOntxkxoC1n5u

    • Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

    Thank you! Where can we buy the screen?

    Enrique -

    I didn't get any of the details on the screen when I tore it down, I will try to get the information from the original display when I can.

    Andrew S -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew S

Member since: 30/07/21

12813 Reputation

One comment

Where can the replacement parts be found? And a charging port?

Ron Magliacane -