Introduction
If the battery in your Connect Four has died, you will need to replace it. The Connect Four Electronic Handheld requires 1 AA battery. To access the battery compartment on the back of the device, you will need a Phillips head screwdriver.
Parts
-
-
Make sure the Connect Four Electronic Handheld is off. There is no off button, so you will need to let it shut off automatically.
-
-
-
Take a Phillips head screwdriver and remove the (9.1mm length) #2 screw in the middle of the battery casing.
-
Slide the cover off and remove the battery.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
