Compaq Evo N1000v LED Cover Replacement

Written By: kim
  • Comments: 0
Compaq Evo N1000v LED Cover Replacement

Difficulty

Easy

Steps

8

Time Required

5 minutes

Introduction

A guide on how to remove the LED Cover.

  1. IVp4JMGehWTGhukw

    • Turn the laptop bottom side up with the rear panel facing forward.

  2. 26AHyZ1XSHKnZYXF

    • Remove the two T8 Torx screws that secure the LED cover to the base enclosure.

  3. UXcadkOxJwyrQcPb

    • Turn the laptop top side up with the front facing forward. Open the screen.

  4. YTd2GKBUeVY3eFqc

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

  5. ikVXSlZLmHrBqjhT

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  6. QOjYJBvPVIjoO3RJ

    • Locate the Pause and Scroll keys near the top right corner of the keyboard.

  7. e1JGuqmvftoRZdBG

    • While holding the Pause and Scroll keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  8. imX4T24lhWwLlnSM
    imX4T24lhWwLlnSM
    3P1QWubE5kGIHTcC

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

kim

Member since: 14/04/10

59 Reputation

0 comments